Contact Us
Shaanxi siweihengqi Science and technology co., LTD. |
Address: 195 baoji high-tech zone |
hi-tech avenue |
Telephone:86+917-3602588 |
86+917-3602008 |
Fax:86+917-3602000 |
Email:swhq@bjswhq.com |
Problem solving
Home >> Service >> Problem solving
Based toll system weighing how to use the proper operation of the instrument? |
[ Publish Time:2010-07-09 | Hits:362 ] |
A: Because the instrument is mainly used to transfer charge computer detection information, the use of very simple, to ensure that no items weighing platform, then power on the instrument, a self-test to post-test zero return to normal, usually without the use of key operations. Note: If you boot with a weight scale platform instrument will be cleared automatically, but preferably in the absence of heavy boot. Key functions and methods of operation: [Speed]: press [] key to display the vehicle speed through the current axis, in units of km / h, then again back to weighing state. [Axis]: Press [] key to display the axis of the vehicle axis, and then a return to weighing mode. Shaft encoder rule See Schedule A (the Ministry of Transportation Decree 2000 2 identical). [Date]: Press [Date] key to display the current date, if it is not corrected by [date] quit date, or enter a new date after by [date]. As March 28, 2003 should enter "030,328." [Time]: Press [time] key to display the current time, if it is not corrected, press [Time] quit time display, otherwise enter the new time by pressing the [time]. 9:28 should be entered as "092,800." [Zero]: If the empty scale display is not zero press [Zero]. [Correction]: When you enter a number by mistake if [Correction] can be corrected. [3]: In weighing mode, press the button to display the vehicle weight, and then a return to weighing mode. |
Print | Close |